Pro-Tech Rubber Edge Sno Pusher 8-Foot Skid Steer

Name: Pro-Tech Rubber Edge Sno Pusher 8-Foot Skid Steer
Brand: Pro-Tech
SKU: pro-tech-rubber-edge-snow-pusher-8ft
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on snopusher.com →

Pro-Tech Rubber Edge Sno Pusher 8-Foot Skid Steer

Overview

Pro-Tech's Rubber Edge Sno Pusher is North America's original containment plow design and has been used by snow contractors for over 25 years. The 8-foot model is well-suited to skid steers working commercial lots, driveways, and mid-size properties. The rubber cutting edge has four usable faces before replacement, providing exceptional value. The fully welded structural steel chassis comes with Pro-Tech's 10-year warranty. Available through Canadian equipment dealers.

Canada Availability

Pro-Tech Sno Pushers are available through Canadian equipment dealers and distributors across the country.

Best for: skid steers, compact tractors, compact wheel loaders

Compare with: Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Width: 8 feet
Cutting edge: rubber (4 usable faces)
Frame: fully welded structural steel channel
Warranty: 10 years
Application: skid steers, compact tractors, compact wheel loaders
Mount: skid steer model available
Best for: commercial lots, driveways, mid-size properties
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from snopusher.com · Last verified: March 2026

View on snopusher.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Pro-Tech in Canada

Pro-Tech is a US manufacturer of snow pushers and winter management equipment with distribution through Canadian dealers. Their sno-pusher products are a common sight in commercial parking lot clearing operations across Canada, particularly in eastern markets.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below