Pro-Tech Rubber Edge Sno Pusher 10-Foot Skid Steer

Name: Pro-Tech Rubber Edge Sno Pusher 10-Foot Skid Steer
Brand: Pro-Tech
SKU: pro-tech-rubber-edge-snow-pusher-10ft
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on snopusher.com →

Pro-Tech Rubber Edge Sno Pusher 10-Foot Skid Steer

Overview

Pro-Tech's 10-foot Rubber Edge Sno Pusher is a top choice for skid steer operators managing mid-to-large commercial properties, strip malls, and large parking areas. The wider box moves more snow per pass and reduces cycle time significantly. Pro-Tech builds with fully welded structural steel and rubber cutting edges rated for four usable faces. The 10-year warranty reflects Pro-Tech's confidence in long product service life. Available through Canadian dealers.

Canada Availability

Pro-Tech Sno Pushers available through Canadian equipment dealers.

Best for: skid steers on mid-to-large commercial properties

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Key Facts

Width: 10 feet
Cutting edge: rubber (4 usable faces)
Frame: fully welded structural steel channel
Warranty: 10 years
Application: skid steers on mid-to-large commercial properties
Mount: skid steer model available
Typical weight: 550–700 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from snopusher.com · Last verified: March 2026

View on snopusher.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Pro-Tech in Canada

Pro-Tech is a US manufacturer of snow pushers and winter management equipment with distribution through Canadian dealers. Their sno-pusher products are a common sight in commercial parking lot clearing operations across Canada, particularly in eastern markets.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below