Paladin FFC 115 Heavy-Duty Snow Blade 96 Inch
Overview
The Paladin FFC 115 is a heavy-duty snow blade with dual cylinders, adjustable skid shoes, and safety steps. The 96-inch model weighs 1,232 lbs and angles 35 degrees with a 32-inch blade height — built for large commercial operations. Available in 96, 108, 120, 132, and 144-inch sizes. Paladin distributes through Canadian dealers including Langner Equipment, which carries the FFC lineup for Canadian commercial operators.
Canada Availability
Compare with: Berlon Industries 84-Inch Snow Blade for Skid Steers · Blue Diamond 108-Inch Snow Blade for Skid Steers · Blue Diamond 84-Inch Skid Steer Snow Blade
Key Facts
- Model: FFC 115
- Working width: 96 inches (also: 108", 120", 132", 144")
- Operating weight: 1,232–1,393 lbs
- Blade height: 32 inches
- Angle: 35 degrees
- Dual hydraulic cylinders
- Adjustable skid shoes and safety steps
- SSQA universal quick attach
Is This Right For You?
Buy if
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
Skip if
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
Also consider
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Paladin Attachments in Canada
Paladin Attachments — now part of Epiroc — manufactures under multiple brands including Bradco, McMillen, and Sweepster. Their products are distributed across North America with Canadian dealers stocking common models.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Paladin Attachments
Paladin Attachments 4-in-1 Skid Steer Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product →
Paladin Attachments Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Paladin Attachments Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product → Paladin Bradco 4-in-1 Skid Steer Bucket
Standard FlowPaladin's Bradco 4-in-1 bucket is a clamshell-style multi-function bucket that digs,...
View product →✓ Last checked: March 2026