Virnig Skid Steer Angle Broom
Overview
The wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards, construction sites — pushing debris to the side in a single pass. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. The poly or wire bristle head adjusts to multiple angles for windrow positioning. Compatible with skid steers and CTLs via SSQA. Available from Virnig Manufacturing (ships to Canada).
Canada Availability
Best for: construction cleanup, parking lots
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon Skid Steer Angle Broom · Berlon 72-Inch Skid Steer Salt and Sand Spreader
Key Facts
- Brand: Virnig Manufacturing
- Type: hydraulic angle broom
- Drive: hydraulic brush motor with angle
- Mount: universal SSQA quick attach
- Application: construction cleanup, parking lots
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
See It in Action
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Virnig
Virnig Skid Steer 4-in-1 Bucket
Standard FlowVirnig Manufacturing produces a 4-in-1 hydraulic combination bucket for skid steers....
View product →
Virnig Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Virnig V50 72-Inch Skid Steer Brush Cutter
Standard FlowThe Virnig V50 72-inch brush cutter is a standard-deck rotary cutter for full-size skid...
View product →
Virnig Skid Steer Concrete Mixer
Standard FlowVirnig Manufacturing offers a concrete mixer attachment for full-size skid steers, built...
View product →✓ Last checked: March 2026