Arctic 6-Foot Box Snow Pusher for Skid Steers

Premium
No hydraulics requiredFits most skid steers, including small-frame
View on arcticsnow.com →
Arctic Box Pusher 6-Foot snow pusher skid steer attachment

Overview

The 6-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Arctic Snow & Ice Control attachments are available through Canadian equipment dealers and distributors. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available in Canada through Arctic Snow & Ice Control dealers.

Canada Availability

Available in Canada through Arctic Snow & Ice Control dealers.

Key Facts

  • Working width: 6 feet
  • Type: box pusher
  • Application: compact machines, farm yards, small lots
  • Mount: universal SSQA
  • Typical weight: 450–580 lbs
  • Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Specs sourced from arcticsnow.com · Last verified: March 2026

See It in Action

Is This Right For You?

Buy if

  • You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
  • You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

  • Your site has no windrow drop zone — pushers pile snow that has to go somewhere
  • Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

  • Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
  • Snow blower attachment if bank height from repeated pushes is becoming a problem
Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About Arctic Snow & Ice Control in Canada

Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.

Care & Maintenance

  • Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
  • Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
  • Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
  • Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
  • Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below

How to Connect

  1. Back machine into push frame receiver
  2. Lower boom to slide trip edges into receiver arms
  3. Engage mounting pins or latch
  4. Raise slightly off ground and test trip edge reset manually if accessible
Safety NoteSnow pushers are passive (no hydraulics) on most models — mounting is mechanical only

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026