Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Name: Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher
Brand: Arctic Snow and Ice
SKU: arctic-snow-pusher-10
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on arctic-snow.com →

Arctic Snow Pusher 10 Foot skid steer attachment

Overview

The 10-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Arctic Snow and Ice attachments are available through Canadian equipment dealers and distributors. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Canadian-manufactured by Arctic Snow and Ice Control. Available through Arctic dealers in Canada.

Canada Availability

Canadian-manufactured by Arctic Snow and Ice Control. Available through Arctic dealers in Canada.

Best for: commercial lot clearing, high-volume Canadian snow removal

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Berlon Industries 10-Foot Snow Pusher for Skid Steers

Key Facts

Brand: Arctic Snow and Ice Control
Width: 10 feet
Type: containment snow pusher
Mount: universal SSQA quick attach
Manufacturer: Canadian-made
Application: commercial lot clearing, high-volume Canadian snow removal
Typical weight: 550–700 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from arctic-snow.com · Last verified: March 2026

View on arctic-snow.com →

See It in Action

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Arctic Snow and Ice in Canada

Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below