Paladin FFC 10-Foot Snow Pusher for Skid Steers

Name: Paladin FFC 10-Foot Snow Pusher for Skid Steers
Brand: Paladin Attachments
SKU: paladin-ffc-snow-pusher-10ft
Availability: InStock

Budget

No hydraulics requiredFits most skid steers, including small-frame

View on paladinattachments.com →

Paladin FFC 10-Foot Snow Pusher for Skid Steers

Overview

Paladin Attachments' FFC 10-foot snow pusher is a commercial-grade containment blade for skid steers and CTLs on commercial snow clearing. The FFC line is designed for demanding daily use, with heavy-gauge steel and reinforced containment panels suited for the rigors of Canadian commercial snow contracts. At 10 feet, it clears mid-size lots efficiently in fewer passes. Available through authorized Canadian dealers.

Canada Availability

Available in Canada through authorized Paladin Attachments dealers.

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Key Facts

Working width: 120 inches (10 feet)
Type: containment box snow pusher
Brand line: Paladin FFC
Construction: heavy-gauge steel
Cutting edge: rubber or steel
Typical weight: 550–700 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from paladinattachments.com · Last verified: March 2026

View on paladinattachments.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Paladin Attachments in Canada

Paladin Attachments — now part of Epiroc — manufactures under multiple brands including Bradco, McMillen, and Sweepster. Their products are distributed across North America with Canadian dealers stocking common models.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below