New Holland Skid Steer Angle Broom
Overview
The wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards, construction sites — pushing debris to the side in a single pass. New Holland agriculture and construction dealers are spread across all Canadian provinces, providing local support for attachments. The poly or wire bristle head adjusts to multiple angles for windrow positioning. Compatible with skid steers and CTLs via SSQA. Available through New Holland dealers across Canada.
Canada Availability
Best for: construction cleanup, parking lot sweeping
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon Skid Steer Angle Broom · Berlon 72-Inch Skid Steer Salt and Sand Spreader
Key Facts
- Brand: New Holland Construction
- Type: hydraulic angle broom
- Drive: hydraulic brush motor with angle
- Mount: New Holland quick attach (SSQA compatible)
- Application: construction cleanup, parking lot sweeping
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from New Holland
New Holland Skid Steer 4-in-1 Bucket
Standard FlowNew Holland's 4-in-1 combination bucket is designed for L and C series machines. The...
View product →
New Holland Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
New Holland 72 Inch Skid Steer Utility Bucket
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →
New Holland Large Skid Steer Cement Mixer
Standard FlowThe New Holland Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly...
View product →✓ Last checked: March 2026