Berlon Industries 72-Inch Angle Broom for Skid Steers
Overview
Berlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment for skid steers on paved surface sweeping, construction site cleanup, and grain elevator floor maintenance. Alberta-manufactured to handle Canadian working conditions year-round. The angled brush sweeps material to the side for efficient cleanup. Available through Berlon's Canadian dealer channels.
Canada Availability
Best for: paved sweeping, construction cleanup, grain elevators
Compare with: Berlon 72-Inch Skid Steer Salt and Sand Spreader · Blue Diamond 60-Inch Angle Broom Skid Steer · Blue Diamond 72-Inch Angle Broom for Skid Steers
Key Facts
- Working width: 72 inches
- Type: angle broom
- Manufacturer: Canadian-made by Berlon Industries, Alberta
- Application: paved sweeping, construction cleanup, grain elevators
- Drive: hydraulic motor, angle adjustable
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
.jpg)
More from Berlon
Berlon 4-in-1 Skid Steer Bucket
Standard FlowBerlon Industries manufactures a Canadian-made 4-in-1 hydraulic combination bucket....
View product →
Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →
Berlon Industries Skid Steer Cement Mixer
Standard FlowBerlon Industries' skid steer cement mixer is a Canadian-made hydraulic drum mixer for...
View product →
Berlon Industries 84-Inch Dozer Blade for Skid Steers
Standard FlowBerlon Industries' 84-inch dozer blade is a straight-push grading attachment for skid...
View product →✓ Last checked: March 2026