New Holland Large Skid Steer Cement Mixer

Name: New Holland Large Skid Steer Cement Mixer
Brand: New Holland
SKU: new-holland-cement-mixer-large
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowFits most skid steers, including small-frame

New Holland Large Cement Mixer skid steer attachment

Overview

The New Holland Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly on Canadian job sites using the skid steer's hydraulic system to rotate the drum. New Holland agriculture and construction dealers are spread across all Canadian provinces, providing local support for attachments. On-site mixing reduces waste and delivery costs compared to ready-mix trucks for small pours — footings, posts, small slabs. Mounts via universal SSQA. Available through New Holland dealers across Canada.

Canada Availability

Available through New Holland dealers across Canada.

Compare with: Berlon Industries Skid Steer Cement Mixer · Berlon Heavy Duty Skid Steer Cement Mixer · Blue Diamond Skid Steer Cement Mixer

Key Facts

Brand: New Holland Construction
Type: large hydraulic cement mixer
Drive: hydraulic drum motor
Mount: New Holland quick attach (SSQA compatible)
Weight: 500–1200 lbs
Hydraulic flow: 10–20 GPM

✓ Last verified: March 2026

Is This Right For You?

Buy if

You pour continuous large batches — footings, columns, or multiple structures in sequence
Your crew does daily concrete work and needs a mixer that can keep up with demand all day
Large-frame skid steer with adequate hydraulic flow to power the drum continuously

Skip if

You pour occasional small batches — a standard mixer handles that without the extra weight and cost
Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum

Also consider

Standard cement mixer for occasional or small-batch concrete work
Concrete hopper for pour-only work where mixing is done elsewhere

Machine Compatibility

Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.

About New Holland in Canada

New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.

Care & Maintenance

Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time

How to Connect

Attach mixer frame using Bob-Tach
Connect hydraulic drum rotation circuit
Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
Verify drum is empty before connecting to machine

Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.