Blue Diamond 72-Inch Angle Broom for Skid Steers

Premium
Standard Flow
Runs on standard auxiliary flowFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 72-Inch Angle Broom for Skid Steers

Overview

Blue Diamond Attachments makes hydraulic angle brooms for skid steers that ship to Canada. The 72-inch angle broom handles spring road sand cleanup, construction site sweeping, and commercial parking lot maintenance. Blue Diamond brooms offer good value for operators looking for an aftermarket option with Canadian availability.

Canada Availability

Blue Diamond ships to Canada and has Canadian dealer coverage.

Key Facts

  • Working width: 72 inches
  • Type: hydraulic angle broom
  • Application: road sand, construction site sweeping, commercial lots
  • Standard SSQA skid steer quick attach mount
  • Weight: 300–900 lbs
  • Hydraulic flow: 15–25 GPM
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
  • Spring road sand cleanup in Canadian parking lots is a core task for your machine

Skip if

  • You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
  • Fine dust or regulated material (silica) requires containment — an angle broom disperses it

Also consider

  • Pickup broom if you need to collect material rather than side-cast it
  • Street sweeper or vacuum attachment if dust control is a regulatory requirement
Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
  • Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
  • Grease drum bearing end caps monthly during active use periods
  • Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
  • Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality

How to Connect

  1. Attach broom frame using Bob-Tach
  2. Connect hydraulic couplers for rotation motor
  3. Verify rotation direction (forward-sweep or reverse-sweep per job)
  4. Adjust broom angle if applicable — most have manual tilt adjust
Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026