New Holland Skid Steer 4-in-1 Bucket
Overview
New Holland's 4-in-1 combination bucket is designed for L and C series machines. The hydraulic clam action enables digging, scraping, clamping, and levelling without swapping attachments. Used on Canadian construction and farm sites for versatile material handling. Available through New Holland dealers.
Canada Availability
Best for: versatile construction and farm material handling
Compare with: Berlon 4-in-1 Skid Steer Bucket · Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers
Key Facts
- Brand: New Holland Construction
- Type: hydraulic 4-in-1 bucket
- Functions: bucket, blade, clam, grapple
- Drive: hydraulic cylinders
- Mount: New Holland quick attach (SSQA compatible)
- Application: versatile construction and farm material handling
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
Skip if
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
Also consider
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
Berlon 84-Inch Skeleton Rock Grapple
Standard FlowBerlon's 84-inch skeleton rock grapple weighs 1,343 lbs and is one of the heavier-built...
View product →
Bobcat 60-Inch Pallet Forks for Skid Steers
Bobcat's 60-inch pallet forks are an extended-length tine set for handling longer loads...
View product →More from New Holland
New Holland Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
New Holland Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
New Holland Large Skid Steer Cement Mixer
Standard FlowThe New Holland Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly...
View product → New Holland Skid Steer Cement Mixer
Standard FlowNew Holland's skid steer cement mixer pairs with New Holland L and C series machines,...
View product →✓ Last checked: March 2026