New Holland Skid Steer Auger Drive
Overview
The wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil conditions ranging from sandy loam to hard clay. New Holland agriculture and construction dealers are spread across all Canadian provinces, providing local support for attachments. Carbide teeth cut efficiently and are replaceable when worn. Pairs with a hydraulic auger drive unit; check your machine's GPM output for compatibility. Available through New Holland dealers across Canada.
Canada Availability
Best for: fence posts, footings, utility drilling
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Brand: New Holland Construction
- Type: hydraulic auger drive
- Drive: hydraulic motor
- Mount: New Holland quick attach (SSQA compatible)
- Application: fence posts, footings, utility drilling
- Typical bit weight: 35–60 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
Buy if
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
Skip if
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
Also consider
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from New Holland
New Holland Skid Steer 4-in-1 Bucket
Standard FlowNew Holland's 4-in-1 combination bucket is designed for L and C series machines. The...
View product →
New Holland Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
New Holland 72 Inch Skid Steer Utility Bucket
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →
New Holland Large Skid Steer Cement Mixer
Standard FlowThe New Holland Large Skid Steer Cement Mixer mixes concrete, mortar, and grout directly...
View product →✓ Last checked: March 2026