New Holland Large Skid Steer Stump Grinder
Overview
The New Holland Large Skid Steer Stump Grinder grinds stumps below grade on Canadian acreages, yards, and construction sites, eliminating regrowth and tripping hazards. New Holland agriculture and construction dealers are spread across all Canadian provinces, providing local support for attachments. Carbide teeth on a spinning wheel cut through hardwood stumps; teeth are individually replaceable. High-flow hydraulics are typically required. Available through New Holland dealers across Canada.
Canada Availability
Compare with: Baumalight S12 Stump Grinder for Skid Steers · Baumalight S18 Skid Steer Stump Grinder · Baumalight S24 Skid Steer Stump Grinder
Key Facts
- Brand: New Holland Construction
- Type: large hydraulic stump grinder
- Drive: high-flow hydraulic motor
- Mount: New Holland quick attach (SSQA compatible)
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
Is This Right For You?
Buy if
- You grind hardwood stumps over 18 inches diameter — large oaks, maples, or elms that standard grinders struggle with
- Production tree service or land clearing where stump count and diameter are high
- Your large-frame skid steer has the hydraulic flow and lift capacity to run a heavy grinder effectively
Skip if
- Most of your stumps are under 12 inches — a standard grinder completes those faster with less wear
- Your machine is compact or mid-frame — a heavy grinder may exceed carrier capacity
Also consider
- Standard stump grinder for typical residential and light commercial stump removal
- Side-shift stump grinder if you work near obstacles frequently
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from New Holland
New Holland Skid Steer 4-in-1 Bucket
Standard FlowNew Holland's 4-in-1 combination bucket is designed for L and C series machines. The...
View product →
New Holland Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
New Holland Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
New Holland 72 Inch Skid Steer Utility Bucket
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026