Baumalight S12 Stump Grinder for Skid Steers
Overview
Baumalight's S12 is a compact stump grinder for skid steers, designed for grinding smaller tree stumps down to below grade. Ontario-manufactured with carbide-tipped grinding teeth. The S12 suits residential tree service work, utility line clearing, and municipality work where smaller stumps need to be removed economically. Available through Baumalight and TAG Equipment dealers in Canada.
Canada Availability
Best for: residential stump removal, utility clearing, small stumps
Compare with: Baumalight S18 Skid Steer Stump Grinder · Baumalight S24 Skid Steer Stump Grinder · Baumalight S28 Skid Steer Stump Grinder
Key Facts
- Type: hydraulic stump grinder (compact)
- Model: S12
- Manufacturer: Baumalight (Ontario, Canada)
- Application: residential stump removal, utility clearing, small stumps
- Drive: hydraulic motor with carbide-tooth grinding wheel
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
See It in Action
Is This Right For You?
Buy if
- You remove tree stumps on residential or commercial properties where a dedicated stump grinder trailer isn't cost-effective
- Landscaping, tree service, or property clearing contracts where stump removal is part of the job
- You already run a skid steer and want to add stump grinding without a second piece of dedicated equipment
Skip if
- Large hardwood stumps over 18 inches are your primary target — a heavy-duty grinder works more efficiently
- Stumps are tight against structures regularly — a side-shift model gives you access a standard unit can't
Also consider
- Heavy-duty stump grinder for large-diameter hardwood stumps
- Side-shift stump grinder for tight obstacle-constrained work sites
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Baumalight
Baumalight 10 Inch Skid Steer Auger Bit
High FlowThe 10-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Baumalight 12 Inch Skid Steer Auger Bit
High FlowThe 12-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Baumalight 18 Inch Skid Steer Auger Bit
High FlowBaumalight's 18-inch auger bit is a large-diameter bit for deep foundation and pier...
View product →
Baumalight 6 Inch Skid Steer Auger Bit
High FlowBaumalight manufactures a 6-inch auger bit for use with Baumalight auger drives on skid...
View product →✓ Last checked: March 2026