Werk-Brau 10-Foot Snow Pusher for Skid Steers

Name: Werk-Brau 10-Foot Snow Pusher for Skid Steers
Brand: Werk-Brau
SKU: werk-brau-snow-pusher-10ft
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on werk-brau.com →

Overview

The Werk-Brau 10-foot snow pusher is a containment box-style snow pusher built to handle the demanding Canadian winter season. Side containment panels direct snow in front of the machine for controlled windrow stacking, while the 10-foot width moves substantial volume per pass on commercial lots. Werk-Brau's heavy steel construction holds up to hard-pack snow and frozen debris. Available through Canadian dealers.

Canada Availability

Available in Canada through authorized Werk-Brau dealers.

Best for: commercial parking lots, commercial snow removal

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Key Facts

Working width: 120 inches (10 feet)
Type: containment box snow pusher
Cutting edge: rubber or steel
Application: commercial parking lots, commercial snow removal
Mount: universal skid steer quick attach (SSQA)
Typical weight: 550–700 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from werk-brau.com · Last verified: March 2026

View on werk-brau.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Werk-Brau in Canada

Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below