Werk-Brau 72-Inch 4-in-1 Multipurpose Bucket for Skid Steers
Overview
The Werk-Brau 4-in-1 multipurpose bucket functions as a general purpose bucket, dozer blade, clam-shell grapple, and grader in a single attachment. The two-piece clam design opens and closes hydraulically, allowing operators to grab, scrape, and carry without switching attachments. At 72 inches, this is a versatile all-rounder for Canadian construction and landscaping contractors. Available through authorized Canadian Werk-Brau dealers.
Canada Availability
Compare with: Berlon 60-Inch General Purpose Bucket for Skid Steers · Berlon 84-Inch GP Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket
Key Facts
- Working width: 72 inches
- Type: 4-in-1 multipurpose / clam bucket
- Functions: GP bucket, dozer blade, grapple, grader
- Drive: hydraulic clam cylinder
- Mount: universal skid steer quick attach (SSQA)
- Typical weight: 430–560 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
Skip if
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
Also consider
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
TMG-SLG50 Rotary Log Grapple for Skid Steers
Standard FlowThe TMG-SLG50 is a 360-degree rotating log grapple from Canadian manufacturer TMG...
View product →
Kubota Skid Steer Pallet Forks
The Kubota Skid Steer Pallet Forks handles palletized loads, lumber bundles, and baled...
View product →More from Werk-Brau
Werk-Brau 60-Inch Angle Broom for Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 96-Inch Angle Broom for Large Skid Steers
Standard FlowThe 96-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Werk-Brau Skid Steer Auger Drive Unit
Standard FlowWerk-Brau manufactures hydraulic auger drive units for skid steers, compatible with...
View product →✓ Last checked: March 2026