Bobcat 120-Inch Snow Pusher for Skid Steers

Name: Bobcat 120-Inch Snow Pusher for Skid Steers
Brand: Bobcat
SKU: bobcat-snow-pusher-120
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on bobcat.com →

Bobcat 120-Inch Snow Pusher for Skid Steers

Overview

The Bobcat 120-inch (10-foot) snow pusher is a large-capacity containment pusher for full-size Bobcat skid steers and CTLs on large commercial properties. The 10-foot width allows fast clearance of wide parking lanes and loading areas. Containment panels prevent snow from spilling around the sides during transport to stacking areas. A key tool for commercial snow contractors in Canada. Available through Bobcat dealers across Canada.

Canada Availability

Available through Bobcat of Canada dealer network.

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Key Facts

Working width: 120 inches (10 feet)
Type: containment box snow pusher
Side panels: containment box design
Cutting edge: rubber or steel
Mount: Bob-Tach / universal skid steer mount
Typical weight: 550–700 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from bobcat.com · Last verified: March 2026

View on bobcat.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Bobcat in Canada

Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below