Bobcat 80 Inch 4-in-1 Combination Bucket
Overview
The 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working in grading, excavation, and material handling. Bobcat attachments are stocked at Bobcat of Canada dealer locations nationwide, with genuine parts and warranty support. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available through Bobcat dealers across Canada.
Canada Availability
Compare with: Berlon 84-Inch GP Bucket for Skid Steers · Berlon 72-Inch Heavy-Duty Smooth-Edge Skid Steer Bucket · Berlon 84-Inch Heavy-Duty Tooth Skid Steer Bucket
Key Facts
- Brand: Bobcat
- Working width: 80 inches
- Type: hydraulic 4-in-1 bucket
- Functions: bucket, blade, clam, grapple
- Mount: Bob-Tach (Bobcat quick attach)
- Typical weight: 520–680 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
Buy if
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
Skip if
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
Also consider
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
HLA Scrap Grapple Bucket 54-Inch Skid Steer
Standard FlowHLA's 54-inch scrap grapple bucket has two independent grapple arms for handling awkward,...
View product →
HLA Light Duty Pallet Forks 42-Inch 2000 lb Skid Steer
HLA's light duty pallet fork frame pairs 42-inch tines with a 2,000 lb rated capacity,...
View product →More from Bobcat
Bobcat 1.35K Heavy Duty Pallet Fork for Small Skid Steers
The Bobcat 1.35K Heavy Duty Pallet Fork is Bobcat's lightest-duty pallet fork, rated at...
View product → Bobcat 2.5K Standard Duty Pallet Fork with 42-Inch Tines
The Bobcat 2.5K Standard Duty Pallet Fork is a 2,500 lb rated fork assembly with 42-inch...
View product → Bobcat 4K Heavy Duty Pallet Fork with 48-Inch Tines
The Bobcat 4K Heavy Duty Pallet Fork is a 4,000 lb rated OEM attachment with 48-inch tines...
View product → Bobcat 6K Severe Duty Pallet Fork with 48-Inch Tines
The Bobcat 6K Severe Duty Pallet Fork is rated for 6,000 lbs with 48-inch tines — the...
View product →✓ Last checked: March 2026