Werk-Brau 96-Inch Hydraulic Snow Blade for Large Skid Steers
Overview
The Werk-Brau 96-inch hydraulic angle snow blade is a wide-format blade for large-frame skid steers clearing wide commercial lots, roadways, and municipal surfaces. The hydraulic angle adjusts from the cab for efficient side-casting and windrow placement without dismounting. At 96 inches, this is Werk-Brau's widest snow blade — designed for high-production commercial snow clearing where maximum per-pass coverage matters. Ohio-built to Werk-Brau's heavy-steel construction standards. Available through authorized Werk-Brau dealers in Canada.
Canada Availability
Best for: large commercial lots, roads
Compare with: Berlon Industries 84-Inch Snow Blade for Skid Steers · Blue Diamond 108-Inch Snow Blade for Skid Steers · Blue Diamond 84-Inch Skid Steer Snow Blade
Key Facts
- Working width: 96 inches
- Angle: hydraulic
- Application: large commercial lots, roads
- Mount: universal SSQA
- Weight: 400–1200 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
Skip if
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
Also consider
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Werk-Brau
Werk-Brau 4-in-1 Skid Steer Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product → Werk-Brau 72-Inch 4-in-1 Multipurpose Bucket for Skid Steers
Standard FlowThe Werk-Brau 4-in-1 multipurpose bucket functions as a general purpose bucket, dozer...
View product →
Werk-Brau 60-Inch Angle Broom for Skid Steers
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → Werk-Brau 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →✓ Last checked: March 2026