Berlon 72-Inch Hydraulic Snow Blade for Skid Steers
Overview
Berlon's 72-inch hydraulic angle snow blade is well-suited for farm yards, acreages, and small commercial properties on compact to mid-frame skid steers. The hydraulic angle adjusts from the cab for efficient side-casting and windrow control without dismounting. Berlon Industries, based in Wisconsin, has built a strong reputation for durable snow equipment well-suited to North American winter conditions. At 72 inches, this is a practical mid-size choice for typical Canadian property snow clearing. Available through Berlon dealers in Canada.
Canada Availability
Best for: farms, acreages
Compare with: Berlon Industries 84-Inch Snow Blade for Skid Steers · Blue Diamond 72-Inch Snow Blade Skid Steer · Blue Diamond 84-Inch Skid Steer Snow Blade
Key Facts
- Working width: 72 inches
- Angle: hydraulic
- Application: farms, acreages
- Mount: universal SSQA
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
Skip if
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
Also consider
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
.jpg)
More from Berlon
Berlon 4-in-1 Skid Steer Bucket
Standard FlowBerlon Industries manufactures a Canadian-made 4-in-1 hydraulic combination bucket....
View product →
Berlon Industries 72-Inch Angle Broom for Skid Steers
Standard FlowBerlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment...
View product → Berlon Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →✓ Last checked: March 2026