Blue Diamond 108-Inch Snow Blade for Skid Steers

Premium
Standard Flow
Runs on standard auxiliary flowBorderline for small-frame machines: verify ROCFits most mid-frame skid steers and CTLs
View on bluediamondattachments.com →
Blue Diamond 108-Inch Snow Blade for Skid Steers

Overview

Blue Diamond's 108-inch (9-foot) snow blade is a large-format angling blade for full-size skid steers on commercial snow plowing operations. The 9-foot width speeds up large lot and roadway clearing significantly. Blue Diamond blades angle left or right hydraulically for side-cast snow control, and a replaceable cutting edge extends service life. Available through Blue Diamond's Canadian dealer network.

Canada Availability

Available in Canada through Blue Diamond Attachments authorized dealers.

Key Facts

  • Working width: 108 inches (9 feet)
  • Type: angle snow blade
  • Hydraulics: angling left or right via auxiliary circuit
  • Cutting edge: replaceable
  • Mount: universal skid steer quick attach (SSQA)
  • Weight: 425–1300 lbs
  • Hydraulic flow: N/A - passive attachment
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
  • Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
  • You want hydraulic angle adjustment from the cab without stopping to reposition

Skip if

  • You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
  • Budget is tight and your site is obstacle-free — a straight blade costs less and works fine

Also consider

  • Straight snow blade if your sites are flat and obstacle-free
  • Box snow pusher for high-volume commercial lot clearing
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
  • Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
  • Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
  • Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
  • Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season

How to Connect

  1. Attach blade frame using Bob-Tach
  2. Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
  3. Check trip edge spring tension before working — critical for road/pavement use
Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026