New Holland Skid Steer Flail Mower
Overview
New Holland's skid steer flail mower is part of their attachment lineup for L and C series machines. Used for roadside mowing, ditch maintenance, and vegetation control on Canadian municipal and agricultural projects. Available through New Holland's national dealer network.
Canada Availability
Best for: roadside mowing, ditch maintenance, vegetation control
Compare with: Baumalight Mini Skid Steer Flail Mower · Baumalight FM248 Skid Steer Flail Mower · Baumalight FM260 Skid Steer Flail Mower
Key Facts
- Brand: New Holland Construction
- Type: hydraulic flail mower
- Drive: hydraulic flail rotor
- Mount: New Holland quick attach (SSQA compatible)
- Application: roadside mowing, ditch maintenance, vegetation control
- Weight: 700–1800 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
Skip if
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
Also consider
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from New Holland
New Holland Skid Steer 4-in-1 Bucket
Standard FlowNew Holland's 4-in-1 combination bucket is designed for L and C series machines. The...
View product →
New Holland Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
New Holland Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
New Holland 72 Inch Skid Steer Utility Bucket
The 72-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026