Berlon Heavy Duty Skid Steer Cement Mixer

Name: Berlon Heavy Duty Skid Steer Cement Mixer
Brand: Berlon
SKU: berlon-heavy-duty-cement-mixer
Availability: InStock

Mid

Standard Flow

Runs on standard auxiliary flowFits most skid steers, including small-frame

View on berlon.com →

Berlon Heavy Duty Skid Steer Cement Mixer

Overview

Berlon Industries' heavy-duty cement mixer is a Canadian-made hydraulic drum attachment engineered for demanding construction work. The Alberta-built drum is reinforced for high-cycle commercial use — fence contractors, foundation builders, and remote-site crews who mix concrete daily. Heavier construction than Berlon's standard mixer with additional drum reinforcement.

Canada Availability

Canadian-manufactured by Berlon Industries (Alberta). Available through Berlon's Canadian dealer network.

Compare with: Berlon Industries Skid Steer Cement Mixer · Blue Diamond Skid Steer Cement Mixer · Bobcat Skid Steer Cement Mixer

Key Facts

Brand: Berlon Industries
Type: heavy-duty hydraulic cement mixer
Construction: reinforced drum for high-cycle use
Drive: hydraulic motor
Mount: universal SSQA quick attach
Manufacturer: Berlon Industries, Alberta, Canada
Weight: 500–1200 lbs
Hydraulic flow: 10–20 GPM

✓ Specs sourced from berlon.com · Last verified: March 2026

View on berlon.com →

Is This Right For You?

Buy if

You pour continuous large batches — footings, columns, or multiple structures in sequence
Your crew does daily concrete work and needs a mixer that can keep up with demand all day
Large-frame skid steer with adequate hydraulic flow to power the drum continuously

Skip if

You pour occasional small batches — a standard mixer handles that without the extra weight and cost
Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum

Also consider

Standard cement mixer for occasional or small-batch concrete work
Concrete hopper for pour-only work where mixing is done elsewhere

Machine Compatibility

Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.

About Berlon in Canada

Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.

Care & Maintenance

Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time

How to Connect

Attach mixer frame using Bob-Tach
Connect hydraulic drum rotation circuit
Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
Verify drum is empty before connecting to machine

Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.