Bobcat 60-Inch Pallet Forks for Skid Steers
Overview
Bobcat's 60-inch pallet forks are an extended-length tine set for handling longer loads like lumber bundles, pipe, and deep pallets. The 5-foot tine length provides better load support and stability for extended material than standard 48-inch tines. Bobcat factory forks integrate with Bobcat's attachment system for reliable use. Available through Bobcat dealers across Canada.
Canada Availability
Best for: lumber, pipe, oversized pallets
Compare with: Berlon Industries 48-Inch Pallet Forks for Skid Steers · Berlon 60-Inch Pallet Forks for Skid Steers · Blue Diamond 48-Inch Pallet Forks for Skid Steers
Key Facts
- Tine length: 60 inches (5 feet)
- Type: extended pallet forks
- Application: lumber, pipe, oversized pallets
- Mount: Bobcat Bob-Tach (universal SSQA compatible)
- Series: Bobcat factory attachment
- Typical frame weight: 400–550 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
Buy if
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
Skip if
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
Also consider
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Bobcat
Bobcat 66 Inch 4-in-1 Combination Bucket
Standard FlowThe 66-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 80 Inch 4-in-1 Combination Bucket
Standard FlowThe 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 60-Inch 4-in-1 Combination Bucket
Standard FlowBobcat's 60-inch 4-in-1 combination bucket opens in four ways: GP bucket, clamshell...
View product → Bobcat 72-Inch 4-in-1 Bucket
Standard FlowBobcat's 72-inch 4-in-1 bucket functions as a general purpose bucket, clamshell grapple,...
View product →✓ Last checked: March 2026