Werk-Brau 8 Foot Skid Steer Snow Pusher

Name: Werk-Brau 8 Foot Skid Steer Snow Pusher
Brand: Werk-Brau
SKU: werk-brau-snow-pusher-8
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on werkbrau.com →

Overview

The 8-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Werk-Brau (Ohio) builds OEM-quality attachments available through Canadian dealers, with a strong track record on Canadian construction sites. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available through Werk-Brau dealers in Canada.

Canada Availability

Available through Werk-Brau dealers in Canada.

Best for: tight commercial lots, compact machine snow removal

Compare with: Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Brand: Werk-Brau
Width: 8 feet
Type: containment snow pusher
Mount: universal SSQA quick attach
Application: tight commercial lots, compact machine snow removal
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from werkbrau.com · Last verified: March 2026

View on werkbrau.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Werk-Brau in Canada

Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below