Skid-Pro 14-Foot Snow Pusher for Large Skid Steers

Name: Skid-Pro 14-Foot Snow Pusher for Large Skid Steers
Brand: Skid Pro
SKU: skid-pro-snow-pusher-14ft
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on skid-pro.com →

Overview

The 14-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Skid-Pro attachments are direct-to-consumer and available for shipping to Canada, making them a cost-competitive option for Canadian buyers. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available in Canada through Skid-Pro dealers.

Canada Availability

Available in Canada through Skid-Pro dealers.

Best for: large commercial lots

Compare with: Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers · Berlon 14-Foot Snow Pusher for Skid Steers · Blue Diamond 14-Foot Snow Pusher for Skid Steers

Key Facts

Working width: 14 feet
Trip edge: yes
Application: large commercial lots
Mount: universal SSQA
Typical weight: 800–1050 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from skid-pro.com · Last verified: March 2026

View on skid-pro.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Skid Pro in Canada

Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below