Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers

Name: Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers
Brand: Arctic Snow & Ice Control
SKU: arctic-sectional-sno-pusher-14ft
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on arcticsnowandice.com →

Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers

Overview

The Arctic Sectional Sno-Pusher at 14 feet is one of the wider containment pushers for skid steer and CTL operators on major commercial snow clearing contracts. Each blade section flexes independently to maintain clean asphalt contact across large imperfect surfaces. The 14-foot width dramatically reduces pass count on large shopping centres, distribution facilities, and municipal parking areas. Available through Canadian commercial snow dealers.

Canada Availability

Available in Canada through authorized Arctic Snow & Ice Control dealers.

Best for: major commercial properties, distribution centres, municipal areas

Compare with: Berlon 14-Foot Snow Pusher for Skid Steers · Blue Diamond 14-Foot Snow Pusher for Skid Steers · Conterra 14 Foot Skid Steer Snow Pusher

Key Facts

Working width: 168 inches (14 feet)
Type: sectional containment snow pusher
Feature: independent blade sections for consistent scrape
Application: major commercial properties, distribution centres, municipal areas
Cutting edge: replaceable rubber or steel sections
Typical weight: 800–1050 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from arcticsnowandice.com · Last verified: March 2026

View on arcticsnowandice.com →

See It in Action

Is This Right For You?

Buy if

Your lot has uneven pavement, frost heaves, or expansion joints that a rigid pusher would dig into
You want to minimize scraping damage to the pavement surface

Skip if

Your site is smooth and flat — a standard box pusher is simpler and cheaper
The higher purchase price doesn't pencil out for occasional residential use

Also consider

Standard box pusher for flat, uniform lots
Snow blade if you need angle control to push snow to a specific side

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Arctic Snow & Ice Control in Canada

Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below