Metal Pless LiveBoxx 14-Foot Snow Pusher for Skid Steers

Name: Metal Pless LiveBoxx 14-Foot Snow Pusher for Skid Steers
Brand: Metal Pless
SKU: metal-pless-liveboxx-14ft
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on metalpless.com →

Metal Pless LiveBoxx 14-Foot Snow Pusher for Skid Steers

Overview

The Metal Pless LiveBoxx at 14 feet is a large-format snow pusher from this Quebec-based Canadian manufacturer. Metal Pless is known for their patented LiveEdge sectional system, where each blade section moves independently to maintain consistent contact with imperfect pavement. This reduces snow left behind on crowned surfaces, heaved asphalt, and manhole covers — common in Canadian commercial lots. Made in Canada.

Canada Availability

Canadian-manufactured by Metal Pless (Quebec). Available through Metal Pless's Canadian dealer network.

Compare with: Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers · Berlon 14-Foot Snow Pusher for Skid Steers · Blue Diamond 14-Foot Snow Pusher for Skid Steers

Key Facts

Working width: 168 inches (14 feet)
Model: LiveBoxx 14'
Type: sectional containment snow pusher with LiveEdge system
Manufacturer: Canadian-made by Metal Pless, Quebec
Feature: independent sectional blades follow pavement contours
Typical weight: 800–1050 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from metalpless.com · Last verified: March 2026

View on metalpless.com →

See It in Action

Is This Right For You?

Buy if

You move snow on commercial or residential properties and want a high-volume, low-pass attachment
You already own a skid steer and want to add snow clearing without a dedicated machine

Skip if

Your site has no room for a windrow — pushers need a drop zone
You need to move snow over a distance or over a bank — a blower or truck setup handles that better

Also consider

Snow blower attachment if bank management is a regular issue
Snow blade if road clearing and angle control matter more than containment

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Metal Pless in Canada

Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below