Metal Pless LiveBoxx 10-Foot Skid Steer Snow Pusher

Name: Metal Pless LiveBoxx 10-Foot Skid Steer Snow Pusher
Brand: Metal Pless
SKU: metal-pless-liveboxx-10ft
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on lecinfo.com →

Metal Pless LiveBoxx 10-Foot Skid Steer Snow Pusher

Overview

The Metal Pless LiveBoxx is a fixed-wing box plow featuring Metal Pless's patented LiveEdge trip system. The LiveEdge cutting edge is segmented into multiple independent sections (6" x 3/4" x 24" sections) that flex independently across pavement imperfections, ensuring complete surface contact even on uneven lots. This approach reduces salt and abrasive use by up to 50% compared to rigid-edge pushers. The 10-foot model suits mid-to-large skid steers. Metal Pless is a Canadian company based in Quebec. Available through Canadian dealers including Shaw Bros and LEC Info.

Canada Availability

Metal Pless is a Quebec-based Canadian company. Available through Canadian dealers like Shaw Bros (shawbros.ca) and LEC Info (lecinfo.com).

Best for: skid steers, backhoes, wheel loaders

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 10 Foot Skid Steer Snow Pusher

Key Facts

Width: 10 feet
Edge type: LiveEdge — multi-section independent trip system
Edge sections: 6" x 3/4" x 24" steel sections
Wings: fixed
Salt reduction: up to 50% vs rigid edges
Application: skid steers, backhoes, wheel loaders
Made in Canada (Quebec)
Typical weight: 450–580 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from lecinfo.com · Last verified: March 2026

View on lecinfo.com →View on metal-pless.com →

See It in Action

Is This Right For You?

Buy if

You move snow on commercial or residential properties and want a high-volume, low-pass attachment
You already own a skid steer and want to add snow clearing without a dedicated machine

Skip if

Your site has no room for a windrow — pushers need a drop zone
You need to move snow over a distance or over a bank — a blower or truck setup handles that better

Also consider

Snow blower attachment if bank management is a regular issue
Snow blade if road clearing and angle control matter more than containment

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Metal Pless in Canada

Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below