HLA SP4000 14-Foot Snow Pusher for Skid Steers

Mid

No hydraulics requiredFits most skid steers, including small-frame

HLA SP4000 14-Foot Snow Pusher for Skid Steers

Overview

The HLA SP4000 14-foot snow pusher is a large industrial-grade containment pusher from HLA's heavy-duty SP4000 series. At 168 inches, it suits the highest-output skid steers and CTLs clearing major commercial properties, airports, and large industrial facilities. Ontario-manufactured by Horst Welding, the SP4000 series is built for daily heavy use through an entire Canadian winter season.

Canada Availability

Available in Canada through HLA Attachments dealers. Ontario-manufactured by Horst Welding.

Best for: airports, large industrial facilities, major commercial

Compare with: Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers · Berlon 14-Foot Snow Pusher for Skid Steers · Blue Diamond 14-Foot Snow Pusher for Skid Steers

Key Facts

Working width: 168 inches (14 feet)
Model: SP4000
Type: industrial-grade containment snow pusher
Manufacturer: Ontario-made by Horst Welding
Application: airports, large industrial facilities, major commercial
Typical weight: 800–1050 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from hlaattachments.com · Last verified: March 2026

View on hlaattachments.com →

See It in Action

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below