HLA SP3500EF209 108-Inch 3500 Series EdgeFlex Snow Pusher

Mid

No hydraulics required

HLA SP3500EF209 108-Inch 3500 Series EdgeFlex Snow Pusher

Overview

The HLA SP3500EF209 is a 108-inch (9-foot) EdgeFlex version of HLA's 3500 Series snow pusher, available in Ontario from HLA Attachments. The EdgeFlex design uses segmented cutting edges — each segment can flex independently, following road imperfections and frost heaves more closely than a single rigid steel edge. This improves scraping performance on rough or uneven asphalt common in Canadian winter conditions. Available with standard hardox or heavy duty carbide segments for maximum commercial service life.

Canada Availability

Available in Canada through HLA Attachments and HLA Snow dealers. Ontario-manufactured by Horst Welding.

Compare with: Arctic 9-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Pusher width: 108 inches (9 feet)
Mouldboard height: 38 inches
Depth: 36 inches
Weight: approximately 1,305 lbs
Maximum operating weight of carrier: 15,000 lbs
Cutting edge: EdgeFlex segmented — follows surface imperfections
Available with standard hardox or carbide segments
Spring trip cutting edge
AR400 adjustable steel skid bars
2-year commercial warranty
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from hlasnow.com · Last verified: March 2026

View on hlasnow.com →

See It in Action

Is This Right For You?

Buy if

Your lot has uneven pavement, frost heaves, or expansion joints that a rigid pusher would dig into
You want to minimize scraping damage to the pavement surface

Skip if

Your site is smooth and flat — a standard box pusher is simpler and cheaper
The higher purchase price doesn't pencil out for occasional residential use

Also consider

Standard box pusher for flat, uniform lots
Snow blade if you need angle control to push snow to a specific side

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below