John Deere Worksite Pro BL8B Snow Blade
Overview
The BL8B is the most popular size in the Worksite Pro blade lineup — wide enough for efficient commercial work, narrow enough to fit standard parking stalls and drive lanes. It hydraulically angles left or right to windrow snow into rows at the lot perimeter, eliminating constant back-and-forth repositioning. The trip-edge bottom pivots over frost heaves and concrete edges and resets automatically, so operators can push fast without worrying about obstacles hiding under the snow. A solid choice for parking lot contractors running mid-to-large frame skid steers.
Canada Availability
Best for: commercial parking lots, strip malls, industrial yards
Compare with: Berlon Industries 84-Inch Snow Blade for Skid Steers · Blue Diamond 108-Inch Snow Blade for Skid Steers · Blue Diamond 84-Inch Skid Steer Snow Blade
Key Facts
- Working width: 8 feet (96 inches)
- Blade type: trip-edge — bottom section pivots on impact, returns to position
- Angle: hydraulic left/right
- Application: commercial parking lots, strip malls, industrial yards
- SSQA (universal skid steer quick attach) mount
- Compatible with mid-to-large frame skid steers and compact track loaders
- Weight: 400–1200 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
Skip if
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
Also consider
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026