HLA SP350007 84-Inch 3500 Series Snow Pusher

Mid

No hydraulics required

HLA SP350007 84-Inch 3500 Series Snow Pusher

Overview

The HLA SP350007 is an 84-inch snow pusher from the HLA 3500 Series, designed for skid steers, compact wheel loaders, and ag tractors in the 5,500 to 15,000 lb operating weight range. Manufactured in Ontario by HLA Attachments, the 3500 Series is a workhorse in Canadian commercial and agricultural snow clearing. The steel cutting edge is replaceable and reversible for doubled service life. A spring trip mechanism protects the cutting edge from hidden obstacles — a critical feature for frost heaves and curbs common on Canadian parking lots.

Canada Availability

Available in Canada through HLA Attachments and HLA Snow dealers. Ontario-manufactured — widely available at Canadian dealers including GLC Equipment and Timberstar Tractor.

Compare with: Arctic 6-Foot Box Snow Pusher for Skid Steers · Arctic Box Snow Pusher 7-Foot for Skid Steers · Arctic 8-Foot Sectional Sno-Pusher Skid Steer

Key Facts

Pusher width: 84 inches (7 feet)
Mouldboard height: 38 inches
Depth: 36 inches
Weight: approximately 985 lbs
Maximum operating weight of carrier: 15,000 lbs
Cutting edge: steel, replaceable and reversible
Spring trip cutting edge — protects against hidden obstacles
AR400 high tensile adjustable steel skid bars
Double sidewall construction
2-year commercial warranty
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from hlasnow.com · Last verified: March 2026

View on hlasnow.com →

See It in Action

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About HLA in Canada

HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below