Conterra 14 Foot Skid Steer Snow Pusher

Name: Conterra 14 Foot Skid Steer Snow Pusher
Brand: Conterra
SKU: conterra-snow-pusher-14
Availability: InStock

Mid

No hydraulics requiredFits most skid steers, including small-frame

View on conterra.ca →

Overview

The 14-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Conterra attachments are available through Canadian equipment dealers and distributors. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available through Conterra dealers in Canada.

Canada Availability

Available through Conterra dealers in Canada.

Best for: large industrial lots, high-capacity machines, high-volume lots

Compare with: Arctic Sectional Sno-Pusher 14-Foot Snow Pusher for Skid Steers · Berlon 14-Foot Snow Pusher for Skid Steers · Blue Diamond 14-Foot Snow Pusher for Skid Steers

Key Facts

Brand: Conterra
Width: 14 feet
Type: containment snow pusher
Mount: universal SSQA quick attach
Application: large industrial lots, high-capacity machines, high-volume lots
Typical weight: 800–1050 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from conterra.ca · Last verified: March 2026

View on conterra.ca →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Conterra in Canada

Conterra is a Canadian-based attachment company with products designed for Canadian conditions. Their attachment lineup covers several skid steer categories and they have Canadian dealer support, making them a practical choice for contractors looking for domestic availability.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below