Blue Diamond 10-Foot Skid Steer Snow Pusher

Premium
No hydraulics requiredFits most skid steers, including small-frame
View on bluediamondattachments.com →
Blue Diamond 10-Foot Skid Steer Snow Pusher

Overview

Blue Diamond's 10-foot snow pusher handles commercial-scale snow clearing on large parking lots and open industrial sites. The 10-foot box is suited to large-frame machines running at full capacity. Rubber cutting edge and box design protect pavement and move maximum snow per pass. Available through Canadian dealers and online distributors shipping to Canada.

Canada Availability

Blue Diamond attachments are available through Canadian equipment dealers and online distributors shipping to Canada.

Key Facts

  • Box width: 10 feet
  • Type: snow pusher
  • Cutting edge: rubber
  • Application: commercial lots, industrial sites, winter maintenance
  • Compatible: large-frame skid steers, SSQA mount
  • Typical weight: 550–700 lbs
  • Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Specs sourced from bluediamondattachments.com · Last verified: March 2026

Is This Right For You?

Buy if

  • You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
  • You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

  • Your site has no windrow drop zone — pushers pile snow that has to go somewhere
  • Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

  • Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
  • Snow blower attachment if bank height from repeated pushes is becoming a problem
Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Blue Diamond in Canada

Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.

Care & Maintenance

  • Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
  • Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
  • Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
  • Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
  • Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below

How to Connect

  1. Back machine into push frame receiver
  2. Lower boom to slide trip edges into receiver arms
  3. Engage mounting pins or latch
  4. Raise slightly off ground and test trip edge reset manually if accessible
Safety NoteSnow pushers are passive (no hydraulics) on most models — mounting is mechanical only

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026