Berlon Industries 12-Foot Snow Pusher for Skid Steers

Name: Berlon Industries 12-Foot Snow Pusher for Skid Steers
Brand: Berlon
SKU: berlon-snow-pusher-12ft
Availability: InStock

Mid

No hydraulics required

View on berlon.com →

Overview

Berlon Industries' 12-foot snow pusher is a large-format Canadian-made containment pusher for full-size skid steers clearing large commercial lots, warehouse sites, and industrial facilities. At 12 feet wide, each pass covers substantial area efficiently. Built in Alberta to handle Canada's toughest winter conditions, with heavy containment panels and replaceable cutting edge options. Available through Berlon's Canadian dealer network.

Canada Availability

Canadian-manufactured by Berlon Industries (Alberta). Available through Berlon's Canadian dealer network.

Compare with: Arctic 12-Foot Box Snow Pusher for Skid Steers · Arctic Sectional Sno-Pusher 12-Foot Snow Pusher for Skid Steers · Arctic Snow and Ice 12 Foot Skid Steer Snow Pusher

Key Facts

Working width: 144 inches (12 feet)
Type: containment box snow pusher
Manufacturer: Canadian-made by Berlon Industries, Alberta
Cutting edge: rubber or steel
Mount: universal skid steer quick attach (SSQA)
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from berlon.com · Last verified: March 2026

View on berlon.com →

Is This Right For You?

Buy if

You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

Your site has no windrow drop zone — pushers pile snow that has to go somewhere
Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
Snow blower attachment if bank height from repeated pushes is becoming a problem

Machine Compatibility

Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.

About Berlon in Canada

Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below