Skid Pro 96-Inch V-Blade Snow Plow
Overview
Skid Pro's V-blade snow plow splits and directs snow to both sides simultaneously, allowing faster clearing on open drives and roads compared to a straight angle blade. The V position breaks heavy packed snow banks cleanly. Available in multiple widths for mid and large-frame skid steers. Skid Pro ships to Canada and the V-blade is used by Canadian commercial snow contractors working on roads and open areas.
Canada Availability
Best for: roads, wide driveways, commercial lots
Compare with: Berlon Industries 84-Inch Snow Blade for Skid Steers · Blue Diamond 108-Inch Snow Blade for Skid Steers · Blue Diamond 84-Inch Skid Steer Snow Blade
Key Facts
- Working width: 96 inches
- Type: V-blade / V-plow
- Position modes: V, straight, angled
- Application: roads, wide driveways, commercial lots
- SSQA universal quick attach
- Weight: 400–1200 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear roads, laneways, or driveways and need to angle snow to one side or split it to both
- Wind-row control matters more than containment — V-blades cut through packed snow cleanly
- You do both pushing and angling in a single pass, reducing total machine time
Skip if
- Containment is critical — V-blades let snow escape the sides, requiring multiple clean-up passes
- Commercial flat-lot clearing is your primary use — a box pusher covers more ground per pass
Also consider
- Straight snow blade for flat lots where angle control isn't needed
- Box snow pusher for parking lots and loading dock clearing
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Skid Pro
Skid-Pro 4-in-1 Skid Steer Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product → Skid-Pro 60-Inch 4-in-1 Combination Bucket for Skid Steers
Standard FlowThe 60-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Skid Pro 4-in-1 Combo Bucket 72-Inch Skid Steer
Standard FlowSkid Pro's 4-in-1 combo bucket functions as a standard dig bucket, dozer blade, grapple,...
View product →
Skid Pro 84-Inch 4-in-1 Multipurpose Bucket for Skid Steers
Standard FlowSkid Pro's 84-inch 4-in-1 multipurpose bucket functions as a GP bucket, dozer blade,...
View product →✓ Last checked: March 2026