John Deere Worksite Pro BL9B Snow Blade
Overview
At 9 feet, the BL9B is built for high-volume commercial snow removal on large lots, loading docks, and industrial pads where clearing speed matters more than fitting into tight lanes. Hydraulic angle pushes snow continuously into windrows along lot edges without restarting a pass. The trip-edge absorbs obstacles — frozen ruts, expansion joints, low curbs — and springs back, keeping the blade in contact with pavement. Best matched to large-frame skid steers with the hydraulic flow and lift capacity to handle a full-width blade at pace.
Canada Availability
Best for: large commercial lots, loading docks, industrial pads, municipal work
Compare with: Blue Diamond 108-Inch Snow Blade for Skid Steers · Blue Diamond 96-Inch Skid Steer Snow Blade · Bobcat 108-Inch Snow Blade for Skid Steers
Key Facts
- Working width: 9 feet (108 inches)
- Blade type: trip-edge — bottom section pivots on impact, returns to position
- Angle: hydraulic left/right
- Application: large commercial lots, loading docks, industrial pads, municipal work
- SSQA (universal skid steer quick attach) mount
- Compatible with large-frame skid steers and compact track loaders
- Weight: 425–1300 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
Skip if
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
Also consider
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from John Deere
John Deere Worksite Pro 4-in-1 Combination Bucket
Standard FlowJohn Deere's Worksite Pro 4-in-1 bucket is a hydraulic combination attachment for John...
View product →
John Deere AB60B 60 Inch Skid Steer Angle Broom
Standard FlowThe 60-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product → John Deere AB72B 72 Inch Angle Broom
Standard FlowThe 72-inch-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
John Deere 30-Inch Auger for Skid Steers in Canada
Standard FlowThe 30-inch-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →✓ Last checked: March 2026