HLA 3230W Skid Steer Snow Wing Plow
Overview
HLA's 3230W is a wing snow plow for skid steers with 180-degree rotation and a 2-year warranty. Distributed through HLA dealers and Langner Equipment in Canada, and Ontario-manufactured by Horst Welding in Listowel. The wing design allows the blade to angle as a normal blade or swing the wing forward for containment pusher configuration. Used by Canadian commercial snow operators who need multi-position capability.
Canada Availability
Best for: commercial lots, multi-position snow pushing
Compare with: Arctic Snow and Ice Wide Skid Steer Snow Blade · Berlon 72-Inch Hydraulic Snow Blade for Skid Steers · Berlon Industries 84-Inch Snow Blade for Skid Steers
Key Facts
- Model: HLA 3230W
- Type: wing snow plow
- Wing rotation: 180 degrees
- Warranty: 2 years
- Application: commercial lots, multi-position snow pushing
- Ontario-manufactured by Horst Welding
- SSQA skid steer quick attach
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
Buy if
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
Skip if
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
Also consider
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from HLA
HLA 72-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 4-in-1 grapple bucket combines a general-purpose bucket with a hydraulic clamshell...
View product → HLA 84-Inch 4-in-1 Grapple Bucket
Standard FlowHLA's 84-inch 4-in-1 grapple bucket is the larger size in their grapple bucket line,...
View product →
HLA 108-Inch 4-Way Dozer Blade for Large Skid Steers
Standard FlowHLA Attachments' 108-inch 4-way dozer blade is for large-frame skid steers and CTLs doing...
View product → HLA 72-Inch 4-Way Dozer Blade for Skid Steers
Standard FlowHLA Attachments' 72-inch 4-way hydraulic dozer blade provides angle, tilt, and straight...
View product →✓ Last checked: March 2026