Berlon 60 Inch Skid Steer Flail Mower
Overview
The 60-inch-inch flail mower cuts grass, light brush, and overgrown vegetation to a fine mulch on Canadian roadsides, municipal right-of-ways, and acreages. Berlon Industries attachments are available through Canadian equipment dealers and distributors. Flail knives re-ingest cuttings for finer mulching than rotary cutters, and the enclosed deck reduces throw hazard. Requires adequate hydraulic flow. Canadian-manufactured by Berlon Industries (Alberta). Available through Berlon's Canadian dealer network.
Canada Availability
Compare with: Baumalight FM260 Skid Steer Flail Mower · Baumalight FM272 72-Inch Flail Mower for Skid Steers · Baumalight SWF560 Skid Steer Boom Flail Mower
Key Facts
- Brand: Berlon Industries
- Working width: 60 inches
- Type: hydraulic flail mower
- Drive: hydraulic flail rotor
- Mount: universal SSQA quick attach
- Manufacturer: Alberta, Canada
- Weight: 575–1500 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
Skip if
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
Also consider
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Berlon
Berlon 4-in-1 Skid Steer Bucket
Standard FlowBerlon Industries manufactures a Canadian-made 4-in-1 hydraulic combination bucket....
View product →
Berlon Industries 72-Inch Angle Broom for Skid Steers
Standard FlowBerlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment...
View product → Berlon Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →✓ Last checked: March 2026