Case Skid Steer Angle Broom
Overview
Case Construction Equipment offers a hydraulic angle broom for Case skid steers. The adjustable broom angle directs swept material to the side while the operator moves forward. Used for construction site cleanup, parking lot sweeping, and municipal road maintenance across Canada. Available through Case dealers.
Canada Availability
Best for: construction cleanup, parking lots, municipal sweeping
Compare with: Berlon Industries 72-Inch Angle Broom for Skid Steers · Berlon Skid Steer Angle Broom · Berlon 72-Inch Skid Steer Salt and Sand Spreader
Key Facts
- Brand: Case Construction Equipment
- Type: hydraulic angle broom
- Drive: hydraulic brush motor with angle adjustment
- Mount: Case quick attach (SSQA compatible)
- Application: construction cleanup, parking lots, municipal sweeping
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Designed for Case machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Case CE in Canada
Case Construction Equipment attachments are available through a national Canadian dealer network. Built to OEM standards and compatible with Case skid steers via universal quick attach.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Case CE
Case Skid Steer 4-in-1 Combination Bucket
Standard FlowCase Construction Equipment offers a 4-in-1 combination bucket for Case skid steers and...
View product →
Case Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Case Skid Steer Cement Mixer Attachment
Standard FlowCase's skid steer cement mixer is engineered for Case SV and SR series machines, featuring...
View product →
Case Skid Steer Dozer Blade
Standard FlowThe wide-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways,...
View product →✓ Last checked: March 2026