Bobcat 48-Inch Angle Broom for Skid Steers
Overview
Bobcat's 48-inch angle broom is sized for mini skid steers and compact models working in tight spaces — warehouse aisles, loading docks, and indoor construction sites. The angled bristle drum rotates to windrow debris to one side. Available in hydraulic angle and fixed positions. Available through authorized Bobcat dealers in Canada.
Canada Availability
Best for: indoor, tight spaces, warehouse, loading docks
Compare with: Blue Diamond 60-Inch Angle Broom Skid Steer · Blue Diamond 60-Inch Pickup Broom Skid Steer · Bobcat 60-Inch Angle Broom for Skid Steers
Key Facts
- Working width: 48 inches
- Type: angle broom
- Application: indoor, tight spaces, warehouse, loading docks
- Mount: Bobcat Bob-Tach
- Hydraulics: aux required
- Weight: 225–675 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
Buy if
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
Skip if
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
Also consider
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Bobcat
Bobcat 1.35K Heavy Duty Pallet Fork for Small Skid Steers
The Bobcat 1.35K Heavy Duty Pallet Fork is Bobcat's lightest-duty pallet fork, rated at...
View product → Bobcat 2.5K Standard Duty Pallet Fork with 42-Inch Tines
The Bobcat 2.5K Standard Duty Pallet Fork is a 2,500 lb rated fork assembly with 42-inch...
View product →
Bobcat 66 Inch 4-in-1 Combination Bucket
Standard FlowThe 66-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 80 Inch 4-in-1 Combination Bucket
Standard FlowThe 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026