Bobcat 96 Inch Deep Skid Steer Trencher
Overview
The 96-inch-inch chain trencher cuts utility, irrigation, and drainage trenches in Canadian soil. Bobcat attachments are stocked at Bobcat of Canada dealer locations nationwide, with genuine parts and warranty support. Tungsten carbide teeth handle hard clay, gravel, and rocky sub-soil that disc trenchers struggle with. Trench width and depth capacity depend on the selected chain configuration. Available through Bobcat dealers across Canada.
Canada Availability
Best for: deep sewer, water mains, large utilities
Compare with: Baumalight TR418 36-Inch Trencher for Skid Steers · Baumalight TR418 Skid Steer Trencher · Baumalight TR418 Skid Steer Trencher — 24-Inch Depth
Key Facts
- Brand: Bobcat
- Trench depth: 96 inches
- Type: deep chain trencher
- Drive: hydraulic chain drive
- Mount: Bob-Tach (Bobcat quick attach)
- Application: deep sewer, water mains, large utilities
- Weight: 950–2650 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
Buy if
- You trench through soft to moderate soil for utilities, drainage, or irrigation lines at 36–60 inch depth
- Your soil is clay, loam, sandy loam, or river bottom — chain trenchers cut fast in these conditions
Skip if
- Your soil is solid rock, dense caliche, or Shield granite — chain links and sprockets wear out fast in rock
- You trench in deeply frozen Prairie ground regularly — rock chain at 3–5× wear rate makes winter trenching expensive
Also consider
- Rock wheel trencher if your ground is consistently rocky or hardpan
- Standard auger if you're drilling individual holes rather than continuous trench lines
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect chain teeth after every use — worn teeth slow penetration dramatically and increase drive motor load; a full day's work can dull a chain in abrasive soil
- Lubricate the drive chain and boom sprockets before each use and again after every 4 hours of continuous trenching
- Check the boom bar for cracking or deformation after work in rocky or abrasive conditions — boom cracks propagate quickly under the bending loads of trenching
- Clean soil from the drive motor cooling fins and chain case after summer use — compacted soil on the motor causes overheating on long cuts
- Store the chain with teeth protected from ground contact — resting a chain on carbide tips on concrete chips the teeth before you've even used it
How to Connect
- Attach trencher boom using Bob-Tach
- Connect high-flow hydraulic couplers
- Test chain tension and direction before cutting
- Call 811 and verify all utilities located before first cut
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Bobcat
Bobcat 1.35K Heavy Duty Pallet Fork for Small Skid Steers
The Bobcat 1.35K Heavy Duty Pallet Fork is Bobcat's lightest-duty pallet fork, rated at...
View product → Bobcat 2.5K Standard Duty Pallet Fork with 42-Inch Tines
The Bobcat 2.5K Standard Duty Pallet Fork is a 2,500 lb rated fork assembly with 42-inch...
View product →
Bobcat 66 Inch 4-in-1 Combination Bucket
Standard FlowThe 66-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 80 Inch 4-in-1 Combination Bucket
Standard FlowThe 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026