Bobcat 12-Inch Auger Bit for Skid Steers
Overview
The Bobcat 12-inch auger bit is one of the most popular auger sizes for Canadian contractors, handling deck footings, fence posts, small tree planting, and utility pole bases. The 12-inch bore accommodates sonotube forms for concrete piers. Carbide-tipped cutting teeth work through soil, gravel, and moderate clay. Compatible with Bobcat's hydraulic auger drive system. Available through Bobcat dealers across Canada.
Canada Availability
Best for: deck footings, fence posts, tree planting, sonotube holes
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Bit diameter: 12 inches
- Type: auger bit for Bobcat auger drive unit
- Application: deck footings, fence posts, tree planting, sonotube holes
- Cutting teeth: carbide-tipped
- Compatible with: Bobcat standard auger drive
- Typical bit weight: 35–55 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
Buy if
- You already have an auger drive unit and need the right bit for your soil type or hole diameter
- You drill specific hole sizes for fence posts, footings, or tree planting and need diameter variety
Skip if
- You don't have an auger drive unit — a bit alone does nothing without a compatible drive motor
- Your soil is solid rock or hardpan — standard earth bits fail fast, you need a dedicated frost/rock bit
Also consider
- Rock or frost auger bit if your ground is caliche, Shield rock, or frozen Prairie soil
- Auger drive unit if you don't yet have one compatible with your machine's hydraulic flow
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Bobcat
Bobcat 1.35K Heavy Duty Pallet Fork for Small Skid Steers
The Bobcat 1.35K Heavy Duty Pallet Fork is Bobcat's lightest-duty pallet fork, rated at...
View product → Bobcat 2.5K Standard Duty Pallet Fork with 42-Inch Tines
The Bobcat 2.5K Standard Duty Pallet Fork is a 2,500 lb rated fork assembly with 42-inch...
View product →
Bobcat 66 Inch 4-in-1 Combination Bucket
Standard FlowThe 66-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product → Bobcat 80 Inch 4-in-1 Combination Bucket
Standard FlowThe 80-inch-inch bucket is purpose-built for skid steers and compact track loaders working...
View product →✓ Last checked: March 2026