Gehl Large Skid Steer Stump Grinder
Overview
Gehl's large stump grinder is designed for full-size skid steers on demanding tree service and commercial land clearing applications. This heavy-duty hydraulic stump grinder handles large-diameter stumps that compact models cannot effectively remove. The high-flow hydraulic motor drives the cutter wheel through hardwood stumps, surface roots, and buried debris. Gehl is part of the Manitou Group and maintains a broad national dealer network in Canada with local service support. A reliable choice for Canadian tree service and commercial clearing contractors.
Canada Availability
Compare with: Baumalight S12 Stump Grinder for Skid Steers · Baumalight S18 Skid Steer Stump Grinder · Baumalight S24 Skid Steer Stump Grinder
Key Facts
- Brand: Gehl (Manitou Group)
- Type: large hydraulic stump grinder
- Drive: high-flow hydraulic motor
- Mount: Gehl quick attach (SSQA compatible)
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
Is This Right For You?
Buy if
- You remove tree stumps on residential or commercial properties where a dedicated stump grinder trailer isn't cost-effective
- Landscaping, tree service, or property clearing contracts where stump removal is part of the job
- You already run a skid steer and want to add stump grinding without a second piece of dedicated equipment
Skip if
- Large hardwood stumps over 18 inches are your primary target — a heavy-duty grinder works more efficiently
- Stumps are tight against structures regularly — a side-shift model gives you access a standard unit can't
Also consider
- Heavy-duty stump grinder for large-diameter hardwood stumps
- Side-shift stump grinder for tight obstacle-constrained work sites
Designed for Gehl machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Gehl in Canada
Gehl is a US equipment and attachment manufacturer with Canadian dealer coverage. Gehl attachments are designed to pair with their skid steer line but are compatible with other machines. Gehl dealers are present in most Canadian provinces and can support both machine and attachment service.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Gehl
Gehl Skid Steer 4-in-1 Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product →
Gehl Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Gehl Skid Steer Auger Drive
Standard FlowThe wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil...
View product →
Gehl Skid Steer Cement Mixer Attachment
Standard FlowGehl's skid steer cement mixer (Gehl is part of Manitou Group) is engineered for Gehl...
View product →✓ Last checked: March 2026