Gehl Skid Steer Auger Drive
Overview
The wide-inch auger bit drills post holes, footings, and fence lines in Canadian soil conditions ranging from sandy loam to hard clay. Gehl attachments are available through Canadian equipment dealers and distributors. Carbide teeth cut efficiently and are replaceable when worn. Pairs with a hydraulic auger drive unit; check your machine's GPM output for compatibility. Available through Gehl (Manitou Group) dealers across Canada.
Canada Availability
Best for: fence posts, footings
Compare with: Baumalight 10 Inch Skid Steer Auger Bit · Baumalight 12 Inch Skid Steer Auger Bit · Baumalight 18 Inch Skid Steer Auger Bit
Key Facts
- Brand: Gehl (Manitou Group)
- Type: hydraulic auger drive
- Drive: hydraulic motor
- Mount: Gehl quick attach (SSQA compatible)
- Application: fence posts, footings
- Typical bit weight: 35–60 lbs
- Hydraulic flow: determined by auger drive unit (typically 15–30 GPM standard flow, 30–45 GPM high-flow for large drives)
Is This Right For You?
Buy if
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
Skip if
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
Also consider
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
Designed for Gehl machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Gehl in Canada
Gehl is a US equipment and attachment manufacturer with Canadian dealer coverage. Gehl attachments are designed to pair with their skid steer line but are compatible with other machines. Gehl dealers are present in most Canadian provinces and can support both machine and attachment service.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Gehl
Gehl Skid Steer 4-in-1 Combination Bucket
Standard FlowThe wide-inch bucket is purpose-built for skid steers and compact track loaders working in...
View product →
Gehl Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Gehl Skid Steer Cement Mixer Attachment
Standard FlowGehl's skid steer cement mixer (Gehl is part of Manitou Group) is engineered for Gehl...
View product → Gehl Skid Steer Concrete Mixer
Standard FlowThe Gehl Skid Steer Concrete Mixer mixes concrete, mortar, and grout directly on Canadian...
View product →✓ Last checked: March 2026