Berlon Skid Steer Stump Grinder
Overview
Berlon Industries offers a Canadian-made hydraulic stump grinder for skid steers. Alberta-manufactured for the Canadian tree service and landscaping market, this unit grinds stumps to below-grade for lot clearing and landscape preparation. A domestically built option for contractors wanting Canadian-sourced equipment.
Canada Availability
Best for: stump removal, landscaping, lot clearing
Compare with: Baumalight S12 Stump Grinder for Skid Steers · Baumalight S18 Skid Steer Stump Grinder · Baumalight S24 Skid Steer Stump Grinder
Key Facts
- Brand: Berlon Industries
- Type: hydraulic stump grinder
- Drive: hydraulic rotary cutter
- Mount: universal SSQA quick attach
- Manufacturer: Berlon Industries, Alberta, Canada
- Application: stump removal, landscaping, lot clearing
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
Is This Right For You?
Buy if
- You remove tree stumps on residential or commercial properties where a dedicated stump grinder trailer isn't cost-effective
- Landscaping, tree service, or property clearing contracts where stump removal is part of the job
- You already run a skid steer and want to add stump grinding without a second piece of dedicated equipment
Skip if
- Large hardwood stumps over 18 inches are your primary target — a heavy-duty grinder works more efficiently
- Stumps are tight against structures regularly — a side-shift model gives you access a standard unit can't
Also consider
- Heavy-duty stump grinder for large-diameter hardwood stumps
- Side-shift stump grinder for tight obstacle-constrained work sites
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →Complete the job — you might also need:
More from Berlon
Berlon 4-in-1 Skid Steer Bucket
Standard FlowBerlon Industries manufactures a Canadian-made 4-in-1 hydraulic combination bucket....
View product →
Berlon Industries 72-Inch Angle Broom for Skid Steers
Standard FlowBerlon Industries' 72-inch angle broom is a Canadian-made hydraulic sweeping attachment...
View product → Berlon Skid Steer Angle Broom
Standard FlowThe wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards,...
View product →
Berlon Industries Skid Steer Auger Drive Unit
Standard FlowBerlon Industries' hydraulic auger drive for skid steers is a Canadian-made drive unit...
View product →✓ Last checked: March 2026