SnowWolf 24-84-H 84-Inch Skid Steer Snow Pusher

Premium
No hydraulics requiredFits most skid steers, including small-frame
View on snowwolfplows.com →
SnowWolf 24-84-H 84-Inch Skid Steer Snow Pusher

Overview

The SnowWolf 24-84-H is a 7-foot snow pusher with SnowWolf's open ribbon design for aggressive snow removal on skid steers. The open ribbon cutting edge flexes over pavement imperfections while still providing full-width snow containment. Designed for mid-frame skid steers clearing driveways, commercial lots, and farm yards. Available through Canadian SnowWolf dealers including Langner Equipment.

Canada Availability

Available through SnowWolf dealers in Canada. Langner Equipment carries SnowWolf products in Canada.

Key Facts

  • Model: 24-84-H
  • Working width: 84 inches (7 feet)
  • Design: open ribbon cutting edge
  • Application: commercial lots, driveways, farm yards
  • Compatible with skid steers (hydraulic mount)
  • SSQA universal quick attach
  • Typical weight: 450–580 lbs
  • Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Specs sourced from snowwolfplows.com · Last verified: March 2026

See It in Action

Is This Right For You?

Buy if

  • You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
  • You don't have room or budget for a blower — pushers cost far less and maintain well

Skip if

  • Your site has no windrow drop zone — pushers pile snow that has to go somewhere
  • Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher

Also consider

  • Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
  • Snow blower attachment if bank height from repeated pushes is becoming a problem
Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About SnowWolf in Canada

SnowWolf is a US manufacturer focused exclusively on snow management equipment. Their UltraPlow and pusher products are known for heavy-duty construction and are used by commercial snow contractors across Canada. SnowWolf dealers are present in major Canadian markets, particularly in regions with high commercial snow clearing activity.

Care & Maintenance

  • Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
  • Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
  • Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
  • Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
  • Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below

How to Connect

  1. Back machine into push frame receiver
  2. Lower boom to slide trip edges into receiver arms
  3. Engage mounting pins or latch
  4. Raise slightly off ground and test trip edge reset manually if accessible
Safety NoteSnow pushers are passive (no hydraulics) on most models — mounting is mechanical only

Ready to Buy in Canada?

Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.

Find a Dealer Near You →

✓ Last checked: March 2026