Metal Pless ReverseMaxx Snow Pusher for Skid Steers

Name: Metal Pless ReverseMaxx Snow Pusher for Skid Steers
Brand: Metal Pless
SKU: metal-pless-reversemaxx-skid-steer
Availability: InStock

Premium

No hydraulics requiredFits most skid steers, including small-frame

View on metalpless.com →

Overview

The Metal Pless ReverseMaxx is a snow plow designed for agricultural loaders, skid steers, and backhoes. Built in Quebec by Metal Pless, the ReverseMaxx features hydraulic wings, the patented LiveEdge cutting edge technology, and a reverse-capable design for working tight areas where standard pushers get stuck. The LiveEdge system provides superior surface cleaning by following pavement imperfections, significantly reducing the residual layer of ice and compacted snow left behind on treated surfaces.

Canada Availability

Manufactured in Quebec by Metal Pless. Available through Canadian dealers serving commercial and agricultural operators.

Compare with: Arctic 12-Foot Box Snow Pusher for Skid Steers · Arctic Box Snow Pusher 16-Foot for Skid Steers · Arctic 6-Foot Box Snow Pusher for Skid Steers

Key Facts

Attachment type: reversible snow plow / pusher
Compatible with: skid steers, backhoes, agricultural loaders
Patented LiveEdge cutting edge — follows surface imperfections
Hydraulic wings
Reverse-capable design for tight-area work
Made in Quebec, Canada
Typical weight: 650 lbs
Hydraulic flow: none required — passive attachment, no auxiliary hydraulics

✓ Specs sourced from metalpless.com · Last verified: March 2026

View on metalpless.com →

See It in Action

Is This Right For You?

Buy if

You move snow on commercial or residential properties and want a high-volume, low-pass attachment
You already own a skid steer and want to add snow clearing without a dedicated machine

Skip if

Your site has no room for a windrow — pushers need a drop zone
You need to move snow over a distance or over a bank — a blower or truck setup handles that better

Also consider

Snow blower attachment if bank management is a regular issue
Snow blade if road clearing and angle control matter more than containment

Machine Compatibility

Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.

About Metal Pless in Canada

Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.

Care & Maintenance

Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below